Zanussi ZD50/33R 지침 책자 - 페이지 17

{카테고리_이름} Zanussi ZD50/33R에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZD50/33R 17 페이지. Refrigerator-freezer zd50/33r

Door reversibility

1. Unplug the appliance from the power supply

before carrying out the below-mentioned

operations.

2. Removethe plastic cover (A) (which clips in)

masking the bottom hinge.

3. Unscrew the bottom hinge (C).

4. Remove the freezer door by releasing it from the

middle hinge (H).

5. Unscrew the middle hinge.

6. Remove the fridge door by releasing it from the

top hinge pin (G).

7. Remove the pin (G) from the top hinge, then

mount these on the opposite side.

8. Refit the fridge door, after having removed the

plugs(I) which must be refitted on the other side.

9. Replace the middle hinge to the left hand side.

10.Replace the freezer door.

11. Screw down the bottom hinge (C) on the opposite

side by using the screws previously removed.

12.The doors can be aligned by adjusting the middle

hinge.

13.The middle hinge can be adjusted horizontally,

with the help of a tool, after having slackened the

two screws.

Attention

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdrier.

D589