Zanussi ZFD 50/17 RAL 지침 책자 - 페이지 18
{카테고리_이름} Zanussi ZFD 50/17 RAL에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFD 50/17 RAL 19 페이지. Zanussi owners manual compact refrigerator freezer zfd 50/17 r, zfd 50/17 ral
페이지 인쇄
WHAT HAPPENS IF SOMETHING GOES WRONG?
Before contacting your local Zanussi Service Centre, check the following points:
The appliance does not work...
Vibration or abnormal noises...
Traces of water on the bottom
of the fridge compartment...
The light does not come on...
Fridge does not defrost...
Other points to check...
If, after the above checks, there is still a fault, call your local Zanussi Service Centre, whose address can be found
in the accompanying Customer Care Booklet, and can also be found in your local telephone directory under «Z».
Please make sure you give the model and serial number of the appliance. This information can be found on the
rating plate inside the fridge compartment on the left side behind the salad drawer, or on the guarantee certificate.
Original spare parts can be purchased from Zanussi Service Centres.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee service calls.
Before contacting your local Zanussi Service Centre, make a note of the model and serial number. This
information can be found on the rating plate situated inside the cabinet behind the bottom fridge/freezer drawer.
SERVICE DETAILS - ADHESIVE LABEL
When you return your guarantee card to Zanussi Ltd., you will receive an Appliance Guarantee and Maintenance
Record Card together with an adhesive label, containing the telephone number of your local Zanussi Service
Centre. The label can be stuck to the machine or adjacent furniture.
18
Check that:
There is power at the socket.
Ensure that there is not a power cut by checking the
household lights.
The fuse has not blown.
The air circulation passages are not covered.
The thermostat dial is in the correct position.
You may hear faint gurgling or bubbling sounds when
the refrigerant is pumped through the coils of tubing at
the rear, to the cooling plate/evaporator. When the
compressor is on, the refrigerant is being pumped round,
and you will hear a whirring or pulsating noise from the
compressor.
A thermostat controls the compressor, and you will hear
a faint "click" when the thermostat cuts in and out.
The defrosting water discharge hole is not obstructed.
The bulb is fitted correctly.
Replace the bulb if it has blown.
The thermostat setting is not too high (see page 10).
Have you turned the thermostat to the correct setting?
Have doors been left open causing the temperature to
rise?
Sometimes the freezer door will be difficult to open
shortly after you have closed it. Don't worry this is due
to pressure difference which will quickly equalise and
allow the door to open normally.
GB