Zanussi ZFD19/4 지침 책자 - 페이지 4

{카테고리_이름} Zanussi ZFD19/4에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFD19/4 11 페이지. Fridge-freezer zfd 19/4

If this appliance featuring magnetic door seals is to

replace an older appliance having a spring lock (latch)

on the door or lid, be sure to make that spring lock

unusable before you discard the old appliance. This

will prevent it from becoming a death-trap for a child.

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

Best performance is obtained with ambient

temperature between +18 C and +43 C (class T);

+18 C and +38 C (class ST); +16 C and +32 C (class

N); +10 C and +32 C (class SN).

The class of your appliance is shown on its rating

plate.

Make sure that there is nothing at the back, at the top

and at the bottom of the appliance to obstruct air

circulation.

For a more efﬁcient operation of the appliance, the

minimum distance between the top of the appliance

and other overhanging kitchen furniture, if any,

should be at least 100 mm (see Fig. 1 - A).

However, the best solution would be that shown in

Fig. 1 - B with no overhanging furniture.

Two adjustable feet make it possible to accurately

level the appliance.

(Fig. 2)

In the plastic envelope containing the Operating

Instructions are also included two wall spacers to be

ﬁtted into the special openings provided on the back

of the appliance.

Push-ﬁt the spacers into the openings, making sure

that arrow (A) is positioned as per Fig. 2 and then turn

the spacers through 45 until they lock in (arrow (A)

in a vertical position).

INSTALLATION

NP003

45°

D039

Fig. 1

Fig. 2