Zanussi ZI 720/8 FF 지침 책자 - 페이지 19

{카테고리_이름} Zanussi ZI 720/8 FF에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZI 720/8 FF 24 페이지. Zanussi instruction booklet refrigerator- freezer zi 720/8 ff

페이지 인쇄

Position the runners (A) at the top and bottom of the

inside of the kitchen unit as shown in the diagram

and mark the position of the external holes. After

preparing the holes, screw the runners to the kitchen

unit door using 3.5x16 mm screws.

Open both the appliance door and that of the kitchen

unit to approx. 90¡.

Place the little plates over the runners. Hold the

doors of the appliance and the unit together and

mark the holes.

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided (3.5x16

mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

If the appliance is fixed to the side of the kitchen unit,

simply slacken the screws in fixing brackets (E),

move the brackets as shown in the figure and re-

tighten the screws.

PR33

8mm

PR34

PR35

D735