Zanussi ZI 921/8 FFA 지침 책자 - 페이지 18

{카테고리_이름} Zanussi ZI 921/8 FFA에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZI 921/8 FFA 20 페이지. Zanussi refrigerator freezer instruction booklet

Place guide (Ha) on the inside part of the furniture

door, up and down as shown in the figure and mark

the position of external holes. After having drilled

holes, fix the guide with the screws supplied.

Fix cover (Hc) on guide (Ha) until it clips into place

Open the appliance door and the furniture door at

90°. Insert the small square (Hb) into guide (Ha).

Put together the appliance door and the furniture

door and mark the holes as indicated in the figure. .

Remove the brackets and mark a distance of 8 mm

from the outer edge of the door where the nail must

be fitted (K).

Place the small square on the guide again and fix it

with the screws supplied.

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.