Zanussi ZI 9224 A 지침 책자 - 페이지 17

{카테고리_이름} Zanussi ZI 9224 A에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZI 9224 A 20 페이지. Zanussi instruction refrigerator zi 9224
Zanussi ZI 9224 A에 대해서도 마찬가지입니다: 지침 책자 (15 페이지)

페이지 인쇄

1. Technical Specifications

PR266

5. Separate parts A, B, C, D as shown in the figure.

PR166

6. Place guide (A) on the inside part of the furniture

door, up and down as shown in the figure and

mark the position of external holes. After having

drilled holes, fix the guide with the screws

supplied.

P R 3 3 /2

7. Fix cover (C) on guide (A) until it clips into place.

PR167

8. Open the appliance door and the furniture door at

90¡. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ¯ 2 mm

at 8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

PR168

9. Should the

alignment of the furniture door be

necessary, use the clearance of slots.

At the end of this procedure, it is necessary to

check if the door of the furniture closes properly.

PR167/1

10. Fix cover (D) on guide (B) until it clips into place.

8mm