Zanussi ZK 23 지침 책자 - 페이지 11

{카테고리_이름} Zanussi ZK 23에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZK 23 14 페이지.
Zanussi ZK 23에 대해서도 마찬가지입니다: 지침 책자 (10 페이지)

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in

compliance with current regulations, consulting a

specialist technician.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

Rear spacers

In the bag with the documentation, there are two

spacers which must be fitted in the two top

corners.

Slacken the screws and insert the spacer under the

screw head, then re-tighten the screws.

D594