Zanussi ZKC 54 L 지침 책자 - 페이지 11
{카테고리_이름} Zanussi ZKC 54 L에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKC 54 L 21 페이지. Refrigerator
Zanussi ZKC 54 L에 대해서도 마찬가지입니다: 지침 책자 (20 페이지), 지침 책자 (20 페이지)
페이지 인쇄
Once the door has ben correctly aligned, tighten the
holding nuts on the fixing brackets and attach the
appliance to the adjacent units and the bottom of the
work surface (Fig. 11).
If the appliance has been fitted into a space 820 mm
high and the maximum height of the base plate is 100
mm, fit the front cover plate by pushing the two
vertical lugs into the rectangular holes on the bottom
side of the ventilation duct until they click. The plate
can be adjusted backwards or forwards in the holes
(Fig. 12).
If the base plate is between 100 and 135 mm high, cut
it as shown in Fig. 14 and mount as described above.
If the base plate is between 135 and 170 mm high, cut
it as shown in Fig. 12.
If the appliance has been fitted into a space 870 mm
high and the maximum height of the base plate is 150
mm, fit the front cover plate as described in Fig. 13.
If the base plate is between 150 and 185 mm high, cut
it as shown in Fig. 14.
If the base plate is between 185 and 220 mm high, cut
it as shown in Fig. 12.
D517
820
870
170
220
D518
820
870
min.
2
50cm
D546
820
870
D520
Fig. 11
Fig. 12
135
185
Fig. 13
100
150
Fig. 14
100÷135
150÷185
11