Zanussi ZKN20/10L 사용자 설명서 - 페이지 6

{카테고리_이름} Zanussi ZKN20/10L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKN20/10L 17 페이지.
Zanussi ZKN20/10L에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄

Regulation and Control

I Freezer control knob

Setting the knob at 1 will give you a minimum freezing

temperature. Setting 7 will give you the maximum fre-

ezing temperature. For normal use set the freezer at a

middle setting (The exact setting will depend on your

usage of the freezer).

2 The door alarm

If either of the doors is left open for a prolonged period

of time the door alarm will start to beeb and a red flas-

hing light will go on. Pressing the alarm button will

switch the buzzer off and the light will stop flashing,

but remain red. If you simply shut the doors, this will

also switch off the door alarm buzzer and the light

automatically.

3 Temperature alarm

If the internal temperature has risen significantly the

temperature alarm will sound and the light will start to

flash. To switch the alarm off simply press the tempe-

rature alarm button. This will stop the buzzer and the

red light will stop blinking and remain red.

The temperature alarm may go on because:

a.- The doors have been left open.

b.- There has been a power failure.

c.- More than the recomended amount of food has been

put in at one time.

d.- You need to set the temperature controls to a colder

position.

If the alarm goes on constantly you should contact you

TECHNICAL OFICIAL SERVICE.

4 Fast Freeze

This feature is designed to help you freeze your

food more quickly. It is best to press the fast freeze

button before going shopping (preferably 3 houres

in advance) in order to have the freezer in an opti-

mal state to put your food in. If you haven't pressed

the button prior to purchasing your food you can of

course put your new purchases in, but it will take

longer for the freezer to cool down. (If you put a lot

of fresh food into your freezer you could cause the

temperature alarm to go on. For further information

see sention on temperature alarm).

5 On/Off button

To make the product work press the ON/OFF but-

ton continuosly for 3 seconds. To switch the pro-

duct off press the button continuously for 3

seconds. When the product has been plugged in and

the button pressed for the 3 seconds, the button will

light up in green. If the ON/OFF button is green the

freezer knob and fridge knob will also be lit up.

6 Fridge control

Setting the knob to the standby position when the

freezer is working, but the fridge if not being used,

(for example when you go on holiday), will help

you to reduce energy consumption. The fridge door

however must be kept closed.

By turning the knob clockwise you will progressi-

vely cool down the fridge. Position 5 is the coldest

setting possible.

If neither the fridge nor the freezer are being used

(i.e. The appliance switched off), both doors should

be left open. This will help to avoid any possible

smells caused by high levels of humidity.