Zanussi ZNHN18FS1 사용 설명서 지침 - 페이지 8

{카테고리_이름} Zanussi ZNHN18FS1에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZNHN18FS1 21 페이지.
Zanussi ZNHN18FS1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

Zanussi ZNHN18FS1 사용 설명서 지침
min.
5 cm
200 cm

CONTROL PANEL

2 1
2
1
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. FastFreeze indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. FastFreeze button
Temperature regulator
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the ON/OFF button (6) if all LED
indicators are off.
SWITCHING OFF
Keep touching the ON/OFF button (6) for 3
seconds.
All indicators light off.
TEMPERATURE REGULATION
Before regulating the temperature, it is necessary
to select the compartment (fridge or freezer).
8
2
min.
200 cm
2
2 3
2 4
5
2
7
4
6
3
CAUTION! Refer to the installation
instructions for the installation.
DOOR REVERSIBILITY
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION! At every stage of reversing
the door protect the floor from
scratching with a durable material.
The upper or lower cavity is selected by the
compartment selection button (6).
To select the freezer compartment touch the
compartment selection button (6) until LED
corresponding to the lower cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is -18°C.
To select the fridge compartment touch the
compartment selection button (6) until LED
corresponding to the upper cavity lights up.
The temperature LED indicator shows the latest set
temperature. Recommended setting is +4°C.
To set temperature:
1. Touch temperature regulator button (7).
Current temperature indicator blinks.
2. Any time you touch the temperature regulator
button (7), the setting moves by one position.
When you select a temperature, the LED
corresponding to selected temperature value
blinks for a while and the setting is fixed.
The set temperature will be reached
within 24 hours. After a power failure
the set temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze function is used to perform pre-
freezing and fast freezing in sequence in the freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects food
products already stored in the freezer compartment
from undesirable warming.