Zanussi ZR 220/2TN 지침 책자 - 페이지 8

{카테고리_이름} Zanussi ZR 220/2TN에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZR 220/2TN 13 페이지.

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided

(3.5x16 mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

The doors can be opened using the sliding system

previously illustrated, or one of the two doors can be

opened by ﬁtting the small handle supplied as an

accessory.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

PR35

D029

Fig. 10

Fig. 10a