Zanussi ZT 46/30 SS 지침 책자 - 페이지 5

{카테고리_이름} Zanussi ZT 46/30 SS에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZT 46/30 SS 20 페이지. Zanussi instruction fridge-freezer zt 46/30 ss
Zanussi ZT 46/30 SS에 대해서도 마찬가지입니다: 지침 책자 (18 페이지)

페이지 인쇄

OPERATION

Setting the temperature

The temperature inside the refrigerator is regulated by

a thermostat with 6 temperature positions and one

«OFF» (O) position.

Position 1 = minimum cold

Position 6 = maximum cold

Turn the thermostat dial to the required position.

An intermediate position is usually the most suitable,

although the temperature will be affected by:

Room temperature

How often the door is opened

How much food is stored

Position of the appliance

In determining the correct temperature control setting

all these factors have to be considered and some

experimentation may be necessary.

When altering the temperature setting, allow 24 hours

for the temperature to stablise before making further

changes.

Ambient Temperature Switch

The appliance is designed to operate in room temper-

atures of 16°C to 32°C, or down to 10°C if the ambi-

ent switch is switched on. The ambient switch should

be switched on when the room temperature drops

below 16°C (the incorporated lamp will illuminate). If

the room temperature drops below the above figures

the temperature in the freezer may rise above -18°C,

then safe storage of frozen food can no longer be

guaranteed. It is most likely that the ambient switch

will need to be depressed throughout the winter to

allow for low overnight temperatures. No damage can

be caused by leaving the switch in this position for a

period of time.

A. Thermostat dial

B. Ambient switch

Important

During prolonged periods of abnormally hot

weather, if the thermostat is set on too high a

number, the cooling system may operate con-

tinuously and the fridge cooling plate may not

defrost. Turning the knob to a lower number will

cause the automatic defrosting to resume.

D325