Zanussi ZUD 9124 A 지침 책자 - 페이지 16

{카테고리_이름} Zanussi ZUD 9124 A에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZUD 9124 A 20 페이지. Zanussi instruction refrigerator zud 9124 a

Building-in instructions

Before carrying out any work, remove the plug from

the power socket.

Left door opening:

Remove the left side (A) of the grid cutting it from the

rear (see figure).

DO002/2

Right door opening:

Remove the right side (B) of the grid cutting it from

the rear (see figure).

To position the grid on the appliance proceed as

follows:

Apply the grid to the base of the appliance by

pushing on to the clasps (a) until they click.

DO001

Building in the appliance under a

worktop

The dimensions of the recessed installation area

must correspond with those indicated in the figure.

DO013

Installation kit

1xB

1xA

1. Two cabinet securing brackets are supplied with

the installation pack. They need to be assembled

onto the cabinet prior to cabinet being pushed into

the Kitchen aperture.

- To fit these brackets remove the two screws at the

top left and right hand front corners of the cabinet.

- Position the two brackets as shown in the figure

and replace the two securing screws.

Left hand bracket

2xC

1xK

18xI

Right hand bracket