Zanussi ZXC 78/31 지침 책자 - 페이지 8

{카테고리_이름} Zanussi ZXC 78/31에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZXC 78/31 18 페이지.
Zanussi ZXC 78/31에 대해서도 마찬가지입니다: 지침 책자 (22 페이지)

Push appliance into housing until stop strip (A)

touches the kitchen unit.

D023

Open the door and push the appliance against the

side of the kitchen unit opposite to that of appliance

hinges.

Fasten the appliance with 4 screws provided in the

kit included with the appliance.

D528

Press in the joint covers between the appliance and

the kitchen unit.

D305

Fig. 4

Fig. 5

Fig. 6

Apply covers (B) on joint cover lugs and into hinge

holes.

D339

Position the runners (H) at the top and bottom of

the inside of the kitchen unit as shown in Fig. 8 and

mark the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.

D094

Open both the appliance door and that of the kitchen

unit to approx. 90 .

Place the little plates over the runners. Hold the

doors of the appliance and the unit together and

mark the holes.

8mm

PR34

Fig. 7

Fig. 8

Fig. 9