Zanussi BM 96 EX 지침 책자 - 페이지 16
{카테고리_이름} Zanussi BM 96 EX에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi BM 96 EX 16 페이지. Built-in ovens bm96; bms841
Zanussi BM 96 EX에 대해서도 마찬가지입니다: 지침 책자 (21 페이지), 지침 책자 (16 페이지)
페이지 인쇄
Securing the Oven to the
Cabinet
Fit the appliance into the cabinet recess.
Open teh oven door and secure the oven to the kitchen
cabinet with four wood screws, which fit the holes provided
in the oven frame (see diagrams).
When installing an electric plate hob over the oven, the
hob's electrical connection and the oven's one have to be
carried out separately, for security reasons and to let the
oven be taken off the unit easier, if necessary.
Electrical Connection
Before the appliance is connected:
1) check that the main fuse and the domestic installation
can support the load;
2) check that the power supply is properly earthed in
compliance with the current rules;
3) check the socket or the double pole switch used for
the electrical connection can be easily reached with
the appliance built in the forniture unit.
This appliance is supplied with a type H05V
connection cable with section 3x1,5 mm
plug. The plug has to be fitted in a proper socket.
If connecting the appliance directly to the electric system,
a double pole switch must be installed between the
appliance and the electricity supply, with a minimum gap
of 3 mm. between the switch contacts and of a type
suitable for the required load in compliance with the
current rules. The earth wire must not be interrupted by
the double switch pole.
The connection cable has to be placed in order that, in
each part, it cannot reach a temperature higher than 90
°C.
After the connection is carried out, test the heating
elements for about 3 minutes.
Terminal block
The oven has an easily accessible terminal block, which
is meant to work with an electric single-phase rate of
230 V.
The manufacturer disclaims any
responsability should all the safety
measures not be carried out.
16
All manuals and user guides at all-guides.com
V
-F
2
2
, provided with
2