Zanussi BST 6 A 지침 책자 - 페이지 18

{카테고리_이름} Zanussi BST 6 A에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi BST 6 A 21 페이지. Multi built-in ovens

If something goes wrong

If the oven is not working correctly, please carry out the following checks, before contacting your local Zanussi Service

Centre.

SYMPTOM

The oven does not come on

The oven temperature light does not come on

The oven light does not come on

It takes too long to finish the dishes, or they

are cooked too fast.

Steam and condensation settle on the food

and the oven cavity.

The timer does not work

The oven fan is noisy

If after all these checks, the oven still does not work,

contact your local Zanussi Service Force Centre.

When you contact them, they will need the following

information:

1. Your name, address and post code.

2. Your telephone number

3. Clear and concise details of the fault

4. The model and the serial number (which can be

found on the rating plate)

5. Date of purchase

SOLUTION

Check the oven is in manual operation and

that both a cooking function and temperature

have been selected.

Check the oven is wired in properly, and the

socket switch or the switch from the mains

supply to the oven are ON.

Select a temperature with the thermostat

control knob

Select a function with the oven function

control knob.

Select a function with the oven function

control knob

Check the light bulb, and replace it if

necessary (see "Cleaning the Oven")

The temperature may need adjusting

Refer to the contents of this booklet,

especially to the chapter "Using the Oven".

Leave dishes inside the oven no longer than

15-20 minutes after the cooking is completed.

Check the instructions for the timer.

Check the grease filter is correctly fitted.

Check that shelves and bakeware are not

vibrating in contact with the oven back panel.

Please note that it will be necessary to provide proof of

purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above

checks have been made as the engineer will make a

charge if the fault is not a mechanical or electrical

breakdown.