Clarke X-Pro CAT213 운영 및 유지 관리 지침 - 페이지 4

{카테고리_이름} Clarke X-Pro CAT213에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke X-Pro CAT213 17 페이지. Air nibbler

GENERAL SAFETY RULES

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

THE WORK ENVIRONMENT

1. ALWAYS keep the work area clean and tidy.

2. ALWAYS dress appropriately - Do not wear loose clothing or jewellery. Tie

long hair out of the way.

3. ALWAYS keep children and visitors away - Do not let children handle the

tool.

4. DO NOT operate the tool where there are flammable liquids or gases.

USE OF AIR POWERED TOOLS

1. ALWAYS stay alert and use common sense - do not operate the tool when

you are tired or under the influence of alcohol, drugs or medication.

2. ALWAYS wear eye protectors when using the nibbler - Eye protection must

provide protection from flying particles from the front and the side.

3. ALWAYS wear ear protectors when using the tool.

4. DO NOT overreach - Keep proper footing and balance at all times.

5. DO NOT use any type of bottled gas as a source of power for the tool.

6. DO NOTconnect the air supply hose with your finger on the trigger.

7. DO NOT exceed the maximum pressure for the tool of 90 psi / 6.2 bar.

8. ALWAYS heck hoses for leaks or worn condition before use and ensure that

all connections are secure.

9. ALWAYS keep the air supply hose away from heat, oil and sharp edges.

10. DO NOT use this tool for any other purpose than that described in this

manual.

11. DO NOT fit this tool to any stand or clamping device that may damage it.

12. DO NOT carry out any alterations or modifications to this tool.

13. ALWAYS disconnect from the air supply when:

• Performing any maintenance

• The tool is not in use.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]