Clarke ZX-R Pro Series 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clarke ZX-R Pro Series에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ZX-R Pro Series 17 페이지. 20v cordless multi function tool
Clarke ZX-R Pro Series에 대해서도 마찬가지입니다: 작동, 유지보수 및 사용 설명서 (8 페이지), 운영 및 유지보수 지침 매뉴얼 (9 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (13 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지)

MAINTENANCE

CLEANING

1. Keep air vents free of blockages, (use compressed air to clean the

machine if possible).

2. After use, clean all dust and wood chippings from the jigsaw.

3. Keep the blade locating clip and support roller clean, you should lightly oil

the support roller at regular intervals.

4. Keep the handle clean.

5. Regularly clean the sole plate to prevent scratches and scores on the

surface.

GENERAL MAINTENANCE

1. Make sure that the power cable it is sound and that there are no cracks or

bare wires.

2. Do not use solvents when cleaning plastic parts, most plastics are

vulnerable to damage from the different types of solvents.

• Make sure that all nuts, bolts and screws stay tight to keep the jigsaw

in a safe working condition.

• All bearings etc, in this tool are lubricated with a sufficient amount of

high grade lubricant for the tools lifetime in normal operating

conditions, therefore no further lubrication is necessary.

• Only use the replacement blades specified for this product (see your

Clarke dealer).

• Refer to your Clarke dealer if internal maintenance is necessary.

Replacement saw blades for wood and metal are available from your Clarke

dealer.

Replacement Blades (10 per pack)

Wood: Part no. 6462188

Metal:

Part no. 6462190

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]