Zanussi ZOB31471WK 사용자 설명서 - 페이지 14

{카테고리_이름} Zanussi ZOB31471WK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOB31471WK 21 페이지.

The oven door can close if you try to

remove the internal glass panel before

you remove the oven door.

CAUTION! Do not use the appliance

without the internal glass panel.

1. Open the door fully and hold the two door

hinges.

2. Lift and turn the levers on the two hinges.

3. Close the oven door halfway to the first

opening position. Then pull forward and remove

the door from its seat.

4. Put the door on a soft cloth on a stable surface.

5. Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

6. Pull the door trim to the front to remove it.

7. Hold the door glass panel by its top edge and

carefully pull it out. Make sure the glass slides

out of the supports completely.

8. Clean the glass panel with water and soap. Dry

the glass panel carefully.

When the cleaning is completed, install the glass

panel and the oven door. Do the above steps in the

opposite sequence.

The screen-printing zone must face the inner side

of the door. Make sure that after the installation the

surface of the glass panel frame on the screen-

printing zones is not rough when you touch it.

Make sure that you install the internal glass panel in

the seats correctly.