Zanussi ZOD35661WK 사용자 설명서 - 페이지 15

{카테고리_이름} Zanussi ZOD35661WK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOD35661WK 21 페이지. Built-in double oven
Zanussi ZOD35661WK에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (21 페이지)

페이지 인쇄

OVEN CEILING

WARNING! Deactivate the appliance

before you remove the heating

element. Make sure that the appliance

is cold. There is a risk of burns.

Remove the shelf supports.

You can fold down the heating element on the oven

ceiling to clean the oven ceiling easily.

1. Hold the heating element with two hands at the

front.

2. Pull it forwards against the spring pressure and

out of two holders.

The heating element folds down.

3. Clean the oven ceiling.

4. Install the heating element in the opposite

sequence.

Install the heating element correctly

above the supports on the inner walls

of the appliance.

5. Install the shelf supports.

REMOVING AND INSTALLING THE DOOR

You can remove the door and the internal glass

panels to clean it. The number of glass panels is

different for different models.

WARNING! The door is heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on the two

door hinges.

3. Close the door until it is at an angle of

approximately 45°.

45°

4. Hold the door with one hand on each side and

pull it away from the oven at an upwards angle.

5. Put the door with the outer side down on a soft

cloth on a stable surface.

6. Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

CAUTION! Rough handling of the

glass, especially around the edges of

the front panel, can cause the glass to

break.

7. Pull the door trim to the front to remove it.

8. Hold the door glass panels on their top edge

one by one and pull them up out of the guide.