Zanussi ZOD370 사용자 설명서 - 페이지 18

{카테고리_이름} Zanussi ZOD370에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOD370 28 페이지. Oven
Zanussi ZOD370에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

Problem

The oven is not cooking evenly.

The oven light fails to illuminate.

The oven fan is noisy.

The oven temperature is too high or too

low.

Installation

• The set-up of the electrical installation is arranged so

that the appliance can be isolated from the mains with

a minimum 3 mm all-pole contact separation.

Suitable isolation devices include, for example, circuit

breakers, fuses (screw type fuses are to be removed

from the holder), RCDs and contactors.

• Anti-shock protection must be provided by the instal-

lation.

• The built-in unit must meet the stability requirements

of DIN 68930.

Check that the appliance is correctly installed and is level.

Check that the recommended temperatures and shelf positions are being

used.

The oven light bulb may need replacing.

Check that the oven is level.

Check that the shelves and bakeware are not vibrating in contact with the

oven back panel.

Check that the recommended temperatures and shelf positions are being

used. Be prepared to adjust the temperature up or down slightly to achieve

the results you want.

• Built-in cookers and cooking surfaces are equipped

with special attachment systems. For safety reasons,

they must only be combined with appliances from the

same manufacturer.

The use of heat protection strips is prohibited for cookers

and ovens with Pyrolytic Cleaning, if the recess has a rear

wall and closed ground-level compartment.

However installation is possible with a ground-level com-

partment that has been shortened by at least 20 mm and

which has base ventilation of the same cross-section.

Possible Solution