Zanussi ZOD370 사용자 설명서 - 페이지 14
{카테고리_이름} Zanussi ZOD370에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOD370 24 페이지. Oven
Zanussi ZOD370에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)
Shelf Support Rails
Removing the shelf support rails
1
Pull the front of the
shelf support rail away
from the side wall.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
The rounded ends of the shelf support rails must
point to the front!
Oven Ceiling
You can fold down the heating element on the oven ceil-
ing to clean the oven ceiling easily.
Warning! Before you fold down the heating element
switch off the appliance. Make sure that the
appliance is cold.
There is a risk of burns!
Folding down the heating element
1.
Remove the shelf support rails.
2.
Hold the heating element with the two hands at the
front
3.
Pull it forwards against the spring pressure and out
along the support on both sides.
4.
The heating element folds down.
The oven ceiling is ready to clean.
14
2
Pull the rear shelf sup-
port rail away from the
side wall and remove it.
Installing the heating element
1.
Install the heating element in opposite sequence.
Important! Install the heating element correctly on the two
sides above the support on the inner wall of the oven.
2.
Insert shelf support rails.
Oven door and glass panels
To clean the oven door remove it.
Caution! Be careful when you remove the door from
the appliance. The door is heavy!
Removing the oven door
1.
Open the oven door as far as it goes.
2.
Lift up clamping levers (A) on the two door hinges
fully.
A
3.
Close the oven door until the first position (angle
approx. 45°).
A