Zanussi ZOG10311XK 사용자 설명서 - 페이지 17

{카테고리_이름} Zanussi ZOG10311XK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOG10311XK 24 페이지.
Zanussi ZOG10311XK에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지)

페이지 인쇄
Zanussi ZOG10311XK 사용자 설명서
Problem
The oven does not operate.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The flame extinguishes immedi-
ately after ignition.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

WARNING!
Refer to Safety chapters.
www.zanussi.com
Possible cause
The automatic ignition does not
work.
The lamp is defective.
You left the dish in the oven for
too long.
Thermocouple is not heated up
sufficiently.
We recommend that you write the data here:
Ignite the burner manually with a
long match. Hold the flame near
the hole in the bottom of the oven
cavity. At the same time push the
knob for the gas control and turn
it counterclockwise to the maxi-
mum temperature. When the
flame comes on, keep the knob
for the gas control pushed for 15
seconds or less to let the ther-
mocouple warm up. If not, the
gas flow is interrupted.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
After lightning the flame, keep the
knob for the gas control pushed
for 15 seconds or less.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Gas connection
WARNING!
Before the gas connection,
disconnect the mains plug from the
mains socket or deactivate the fuse
in the fuse box. Close the primary
valve of the gas supply.
Remedy
17