Zanussi ZOHEE2K2 사용자 설명서 - 페이지 4

{카테고리_이름} Zanussi ZOHEE2K2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOHEE2K2 24 페이지.

페이지 인쇄

• Always use oven gloves to remove or insert accessories or

ovenware.

• To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls.

Install the shelf supports in the opposite sequence.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal scrapers

to clean the glass door since they can scratch the surface,

which may result in shattering of the glass.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions supplied

with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Do not pull the appliance by the handle.

• Install the appliance in a safe and suitable

place that meets installation requirements.

• Keep the minimum distance from other

appliances and units.

• Before mounting the appliance, check if

the appliance door opens without restraint.

• The appliance is equipped with an electric

cooling system. It must be operated with

the electric power supply.

Cabinet minimum height

(Cabinet under the worktop

minimum height)

Cabinet width

Cabinet depth

Height of the front of the

appliance

Height of the back of the

appliance

ENGLISH

2.2 Electrical connection

• All electrical connections should be made

580 (600) mm

• The appliance must be earthed.

• Make sure that the parameters on the

560 mm

550 (550) mm

589 mm

• Always use a correctly installed

• Do not use multi-plug adapters and

570 mm

Width of the front of the ap‐

pliance

Width of the back of the ap‐

pliance

Depth of the appliance

Built in depth of the appli‐

ance

Depth with open door

Ventilation opening mini‐

mum size. Opening placed

on the bottom rear side

Mains supply cable length.

Cable is placed in the right

corner of the back side

Mounting screws

WARNING!

Risk of fire and electric shock.

by a qualified electrician.

rating plate are compatible with the

electrical ratings of the mains power

supply.

shockproof socket.

extension cables.

594 mm

558 mm

561 mm

540 mm

1007 mm

560x20 mm

1100 mm

4x25 mm