Zanussi ZOP37962XE 사용자 설명서 - 페이지 24

{카테고리_이름} Zanussi ZOP37962XE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOP37962XE 28 페이지.

페이지 인쇄

Problem

The display shows "C3".

The display shows "F102".

The display shows an error code

that is not in this table.

The appliance is activated and

does not heat up. The fan does

not operate. The display shows

"Demo".

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Possible cause

The cleaning function does not

operate. You did not fully close

the door, or the door lock is de-

fective.

•

You did not fully close the

door.

•

The door lock is defective.

There is an electrical fault.

The demo mode is activated.

We recommend that you write the data here:

Fully close the door.

•

Fully close the door.

•

Deactivate the oven with the

house fuse or the safety

switch in the fuse box and ac-

tivate it again.

•

If the display shows "F102"

again, contact the Customer

Care Department.

•

Deactivate the oven with the

house fuse or the safety

switch in the fuse box and ac-

tivate it again.

•

If the display shows the error

code again, contact the Cus-

tomer Care Department.

1. Deactivate the oven.

2. Press and hold the button

3. The first digit on the display

4. Enter the code 2468 by

5. The next digit starts to blink.

6. Demo mode deactivates

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

.........................................

Remedy

and Demo indicator start to

blink.

pressing the buttons

to change the values and

press

to confirm.

when you confirm the last

digit and the code is correct.