Zanussi ZOP38903XD 사용자 설명서 - 페이지 21
{카테고리_이름} Zanussi ZOP38903XD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOP38903XD 24 페이지. Product manaul
Zanussi ZOP38903XD에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)
Problem
The display shows an error
code.
It takes too long to cook the
dishes, or they cook too quick-
ly.
Steam and condensation col-
lect on the food and in the
oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
Warning! Refer to the Safety chapters.
Building In
558
573
www.zanussi.com
Possible cause
There is an electronic fault.
The temperature is too low or too
high.
You left the dish in the oven for
too long.
548
20
589
594
1. Deactivate the appliance with the
house fuse or the safety switch in
the fuse box and activate it again.
2. If the display shows the error
code again, contact the service
centre.
• Adjust the temperature if necessary.
• Follow the advice in the manual.
Do not keep the dishes in the appli-
ance for longer than 15 - 20 minutes
after the cooking ends.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity.
.........................................
.........................................
.........................................
min. 550
20
580
min. 560
Remedy
21