Zanussi ZOS37902XD 사용자 설명서 - 페이지 9
{카테고리_이름} Zanussi ZOS37902XD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOS37902XD 32 페이지.
페이지 인쇄
Clock functions
Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
00:00
COUNT UP TIMER
Setting and changing the time
After the first connection to the mains, wait until
the display shows
flashes.
1. Press
or
to set the hours.
2. Press
to confirm and switch to set the
minutes.
The display shows
flashes.
3. Press
or
to set the current minutes.
4. Press
to confirm or the set time of day
will be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press
again until the indicator for the time of day
flashes in the display.
Setting the DURATION
1. Set an oven function.
2. Press
again and again until
flash.
www.zanussi.com
To show or change the time of day. You can change the time of
day only when the appliance is off.
To set how long the appliance operates. Use only when an oven
function is set.
To set when the appliance deactivates. Use only when an oven
function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MINDER at
any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP TIMER
automatically monitor how long the appliance operates. It is on
immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DURA-
TION, END.
and "12:00". "12"
and the set hour. "00"
again and
starts to
Application
3. Press
or
to set the minutes and the
hours for DURATION time.
4. Press
to confirm.
When the time ends an acoustic signal sounds
for 2 minutes.
and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to the
off position.
Setting the END
1. Set an oven function.
2. Press
again and again until
flash.
3. Press
or
to set the hours and the
minutes for END time.
4. Press
to confirm.
At the set time an acoustic signal sounds for 2
minutes.
and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
starts to
9