Zanussi ZOU362 사용자 설명서 - 페이지 30

{카테고리_이름} Zanussi ZOU362에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOU362 36 페이지. Built-under oven
Zanussi ZOU362에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지)

페이지 인쇄

they can damage the oven surface. Clean the oven control

panel following the same precautions.

DO NOT clean the oven door while the

glass panels are warm. If this precaution is

not observed the glass panel may shatter.

If the door glass panel becomes chipped or

has deep scratches, the glass will be

weakened and must be replaced to prevent

the possibility of the panel shattering. Con-

tact your local Service Force Centre who

will be pleased to advise further.

Oven Shelf Support Rails

The shelf support rails on the left and right hand sides

of the oven can be removed for cleaning the side walls.

Removing the shelf support rails

First pull the front of the rail away from the oven wall

and then unhitch at the back (Fig. 4, Fig. 5).

Fitting the shelf support rails

To install, first reattach the rails at the back, then put

them into position at the front and press them into place

(Fig. 6).

To clean the shelf support rails, soak in warm soapy

water and remove stubborn marks with a well wetted

soap impregnated pad.

Rinse well and dry with a soft cloth.

Replacing the Oven Light

Disconnect the appliance

If the oven bulb needs replacing, it must comply with the

following specifications:

Electric power: 15 W/25 W,

Electric rate: 230 V (50 Hz),

Resistant to temperatures of 300°C,

Connection type: E14.

These bulbs are available from your local Service Force

Centre.

To replace the faulty bulb:

1. Ensure the oven is isolated from the electrical supply.

2. Push in and turn the glass cover anticlockwise (Fig.

7).

3. Remove the faulty bulb and replace with the new one.

4. Refit the glass cover and restore the electrical supply.

Fig. 4

Fig. 5

Fig. 6

Fig. 7