Zanussi ZPCNA4X1 사용자 설명서 - 페이지 23

{카테고리_이름} Zanussi ZPCNA4X1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZPCNA4X1 28 페이지. Built-under double oven
Zanussi ZPCNA4X1에 대해서도 마찬가지입니다: 사용자 설명서 (29 페이지)

페이지 인쇄

Step 1

Turn off the oven. Wait until the

oven is cold.

Back lamp

Step 1

Turn the glass cover to remove it.

Step 2

Clean the glass cover.

Step 3

Replace the lamp with a suitable 300 °C heat-resistant lamp.

Step 4

Install the glass cover.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

In any cases not included in this table please

contact with an Authorised Service Centre.

Problem

The oven does not heat

up.

12.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Before you replace the lamp:

Disconnect the oven from the

Check if...

The fuse is blown.

Step 2

Put a cloth on the bottom of the cav‐

mains.

Problem

The display shows

"12.00".

The lamp does not work.

.........................................

Step 3

ity.

Check if...

There was a power cut.

Set the time of day.

The lamp is burnt out.

ENGLISH