Zanussi ZSA 15W 운영 및 설치 매뉴얼 - 페이지 16

{카테고리_이름} Zanussi ZSA 15W에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZSA 15W 18 페이지. Zanussi operating and installation manual built-in oven zsa 15

페이지 인쇄

CLEANING THE OVEN

Before cleaning always allow the cooling

fan to cool the oven down before

switching off at the electricity supply

Cleaning materials

Before using any cleaning materials on your oven,

check that they are suitable and that their use is

recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as

they may dull the surface finishes. Harsh abrasives

should also be avoided.

Glass Panel

This should be cleaned with a soft cloth soaked in

warm soapy water. Do not use abrasive scourers or

steel wool.

Oven Shelves and shelf supports

To clean the oven shelves, and shelf supports soak

in warm soapy water and remove stubborn marks

with a well wetted soap impregnated pad. Rinse well

and dry with a soft cloth.

The shelf supports can be removed for easy cleaning

(see Fig. 8). Please ensure the retaining nuts are

secure when refitting the shelf supports.

FO 0435

Oven Cavity

The enamelled oven cavity is best cleaned whilst the

oven is still warm. It is advisable to wipe the oven

over with a soft cloth soaked in warm soapy water

after each use. However, from time to time it will be

necessary to do a more thorough cleaning, using a

proprietary oven cleaner.

Replacing Components

Prior to undertaking any maintenance work or

replacing the oven light, be sure to disconnect

appliance from the electricity supply.

Replacing The Oven Light

Push in and turn the glass lid anticlockwise (Fig. 9).

Remove the faulty bulb and replace with one which is

heat resistant to 300 C.

FO 0287

Electric bulb: 15W, 220-240 V, 50 Hz, 300 C, E14.

These bulbs are available from your local Zanussi

Service Centre whose address can be found in tho

Zanussi Customer Care Booklet.

Fig. 8

Fig. 9