Zanussi FA889 사용자 설명서 - 페이지 15

{카테고리_이름} Zanussi FA889에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FA889 16 페이지. Washing machine fa581

페이지 인쇄

1. Control Panel

Hydraulic connection

There should be a COLD WATER tap near the

washing machine with a screwing on connection pipe

⁄

" gas for the water supply, a sink, a wash basin

or a drainage system in the wall.

Previously check if:

— it is not a hot water tap.

— the running water is clean. If not, run off a

reasonable amount of water to flush out any

debris that may have collected in the pipes.

Have the permanent drainage system in the wall

checked by a plumber.

AL013

A) Place the enclosed

rubber joint, delivered in

a plastic bag together

with the appliance (A)

Fig.6), at the very end of

the inlet hose and

carefully screw the pipe

to the tap taking care not

to damage the

screwdrive and fix the

nut well on to the end in

order to avoid leaking.

P0021

B) If necessary turn the

hose adequately by

unscrewing the nut at the

rear of the appliance.

C) Now tighten the nut

anew to avoid leaks.

(Open the tap and asure

that it does not leak and

close it again.)

D) Place the discharging

hose in a washbasin or

sink with the aid of the

bent piece delivered

separately. The bent piece

has to be entered into the

tube's mouth in order to

assure the support.

Aforesaid piece allows the

hose to be fixed to the

wall by means of an

opening on the upper part

and that way the hose

does not move and its

falling is avoided.