Zanussi FC800 지침 책자 - 페이지 7

{카테고리_이름} Zanussi FC800에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FC800 32 페이지.

INSTALLATION

Caution

Before starting the machine up, the packing

must be removed as follows:

Note

You are advised to keep all the packing

for re-use in case the machine has to

be transported again.

Lay the machine gently on its back, making

sure that the hoses are not squashed.

Remove the polystyrene block from the

bottom of the machine. Fig. 1.

Fig 1

Place the machine in the upright position,

with the rear of the machine facing you.

Fig. 2. (Transit bars marked 'A').

Unscrew the 4 large bolts holding the transit

bars, with the spanner provided. Fig. 3.

Fig 3

Unscrew the 8 small screws holding the

transit bars to the cabinet. These must be

refitted into the machine after the removal

of the transit bars, Fig. 4, see also Fig. 6.

Fig 4

Remove the transit bars and slide out the

4 plastic pins. See Fig. 5.