Zanussi FCS 720C 지침 및 설치 안내서 - 페이지 7
{카테고리_이름} Zanussi FCS 720C에 대한 지침 및 설치 안내서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FCS 720C 17 페이지. Washing machine fcs 720c
페이지 인쇄
Synthetics and Delicate (dry load weight: 1.5 kg)
Wool (dry load weight: 1.0 kg)
Load
Degree of
type
soiling
Normally
Synthetics
Synthetics
Delicate
Normally
fabrics
Woollens
Spin
Drain
– Rinse-hold is an optional function available for the Synthetics, Delicate and Wool programmes.
To select rinse-hold, press the option button on the machine control panel. Rinse-hold means that the
programme halts and the water from the last rinse is retained in the machine to minimise creasing in
synthetic fibres.
Once the programme has stopped on rinse-hold, if you wish to end the wash with both emptying of water
and spinning of the load, press the option button again so it pops out.
If you wish to end the wash by emptying the water without spinning, you have to advance the programme
control knob manually, to programme setting L. Before you advance the programme control knob
manually, we recommend that you first press the On/Off button to switch the machine off (button pops
out). Once the programme control knob is set at L, press the On/Off button again (button remains in) to
complete the programme.
Progr.
selection
F
soiled
Lightly
F
soiled
G
soiled
Lightly
H
soiled
K
L
Temp.
Progr.
setting (C)
time (min.)
60
~ 74
40
~ 74
30 - 40
~ 56
- 30
~ 50
~ 8
~ 2
- 7 -
Programme
content
60° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
40° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
30°- 40° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
-30° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
Emptying and spin at
600 rpm/min.
Draining