Zanussi FE 1004 사용자 설명서 - 페이지 23

{카테고리_이름} Zanussi FE 1004에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FE 1004 23 페이지. Washing machine fe 1004; fje 1204

Problem

• Spinning starts late or the

laundry is not spun enough:

• The machine makes an unusual

noise

• No water is visible in the drum

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Possible cause

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and

normal spinning can resume. If, after few minutes,

the laundry is still not evenly distributed in the

drum, the machine will spin at a lower speed or

will not spin. If at the end of the programme the

laundry is not spun enough, redistribute the load

manually and select the spin programme.

• The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a

softer start and more even distribution of the

laundry in the drum when spinning, as well as

increased stability of the machine.

• Machines based on modern technology operate

very economically using very little water without

affecting performance.

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042 BD