Zanussi FE 1205 지침 책자 - 페이지 9

{카테고리_이름} Zanussi FE 1205에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FE 1205 23 페이지. Front-loading washing machine

Zanussi FE 1205 지침 책자
132990110•gb
17-11-2003
9:42
Important! If you accidentally press the
SKIP/RESET button more than once, the display will
show three blinking dashes. To drain the water,
select any washing programme by means of the
button, then press SKIP/RESET three times in order
to select the
(DRAIN) position (only the
(DRAIN) light will remain lit).

6 OPTIONS button

Press this button to select the following options:
• PREWASH
: select this option if you wish your
laundry to be prewashed before the main wash
(not available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
• AA 40°: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
The washing time will be prolonged.
The washing temperature will be reduced
automatically.
The EXTRA RINSE and the AA 40°C options can be
selected together by means of the relevant button.
• EXTRA QUICK button
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (not
for wool and HAND WASH programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
• EXTRA RINSE
with all programmes except the wool programme
and hand wash. The machine will add 2 rinses to
the selected program. This option is recommended
for people who are allergic to detergents, and in
areas where the water is very soft.
• SOAK
: select this option if you wish to perform a
soak of about 30 minutes at 30°C to your laundry. By
pressing the DELAY START button the soak time
can be prolonged up to 10 hours max. After this time
the wash cycle will automatically start.
This function is not available for wool and hand-
wash cycle.
The soak ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
Pagina 9
: this option can be selected
7 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET button.
The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on,
if the previously selected cycle has been erased.
• Duration of washing programme in hours
and minutes, after you have selected a
programme.
While the programme is running (after you have
pressed the START/PAUSE button), the displayed
time value decreases by one unit every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
RINSE HOLD option: this is indicated by a
flashing zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero.
The zero will reappear when you switch the
washing machine on, unless the previous
programme has been erased by means of the
SKIP/RESET button.
9