Zanussi FJ 1454 W 지침 책자 - 페이지 8

{카테고리_이름} Zanussi FJ 1454 W에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FJ 1454 W 26 페이지. Zanussi instruction washing machine fj 1054 w fj 1254 w fj 1354 s fj 1454 w

페이지 인쇄

Selecting a special programme:

A wash programme must be selected in the normal way.

(START button not pressed)

A normal wash cycle consists of the following phases,

Wash - Rinses - Spin and is confirmed by the

illumination of the corresponding LED,s.

To select rinses & spin, press the SKIP button once, the

wash LED goes out.

To select spin only, press the SKIP button twice.

The wash & rinses LED,s go out.

To select Drain, press the SKIP button three times, the

wash - rinses - spin LED,s go out.

If you wish to cancel or advance the running programme

to the required phase, PAUSE the cycle and then press

the SKIP button as previously described.

12 Programme phase indicator

lights

When you select a programme, the lights relevant to the

phases that form the programme light up.

After you have started the programme, only the light

relevant to the phase that is currently being carried out

will remain lit.

At the end of the programme the pilot light

illuminates.

If the light

lights up at the end of the programme this

means that the drain filter is clogged.

In the event of operating problems the light of the

START/PAUSE button

lights start to flash:

= the machine does not fill

= the machine does not empty

= the door has not been closed

To eliminate the problem, see paragraph "Something not

working".

and one of the following