Zanussi FJE 1005 지침 책자 - 페이지 16

{카테고리_이름} Zanussi FJE 1005에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FJE 1005 23 페이지. Washing machine fje 1005

페이지 인쇄

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

P1084

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

C0064

C0065

4. Switch the machine on

Press the ON/OFF button

on. The light above the button will light up.

5. Select the desired programme/

fabric

Press the FABRIC

select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The START/PAUSE button light will start flashing.

6. Select the temperature

Press the TEMPERATURE button

select a temperature value different from the one

proposed by the washing machine.

The relevant light will light up.

95˚C

60˚C

40˚C

30˚C

to switch the machine

button repeatedly, in order to

PREWASH

WASH

RINSES

RINSE HOLD

SPIN

DRAIN

FILTER

END

if you wish to