Zanussi FL 1015 지침 책자 - 페이지 16

{카테고리_이름} Zanussi FL 1015에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FL 1015 24 페이지. Washing machine fl 1015; fl 1008

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the

ECO valve. Then run the cotton cycle 60°E, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

4. Select the desired programme

Turn the programme selector dial to the desired

position.The light of the START/PAUSE button starts

to flash.

The lights corresponding to the different phases

making up the selected programme light on.

5. Select the required option(s)

The light corresponding to the depressed button

illuminates.

6. Select the spin speed or option

Turn the spin speed selector to the required speed or

option

When selecting RINSE HOLD option

of the last rinse is not emptied out, to prevent the

fabrics from creasing.

, the water