Zanussi FL 1016/A 사용 및 관리 지침 - 페이지 13

{카테고리_이름} Zanussi FL 1016/A에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FL 1016/A 32 페이지. Zanussi washing machine instructions for the use and care
Zanussi FL 1016/A에 대해서도 마찬가지입니다: 사용 지침 및 관리 매뉴얼 (32 페이지)

페이지 인쇄

G «Spin care» button |}©

As the name implies, this button allows

spin speed to be reduced from 1000 to 850

rpm in energetic wash programs, and

from 850 to 650 rpm in the short-spin

program.

We recommend reduction of spin when

washing items with special trimmings

(fringes, lace, etc.) or particularly worn

items.

H Programme control and

on/ off control

The selector dial is marked with letters

corresponding to those on the chart.

To set the machine to the correct

programme (see programme chart and

table on pages 14-17) push the dial in and

turn it clockwise until the letter you want

coincides exactly with the red pointer at

the top of the dial. Never attempt to turn

the control dial in an anti-clockwise

direction.

To start the machine, pull out the knob. If

the knob does not come out easily check

that the pointer is in line with the

selected letter - if it is not, reset the dial.

To stop the machine during a cycle, push

the dial in. At the end of the programme

push the knob in and the pilot light will

go out. The machine will have stopped

automatically.

The symbols around the dial indicate at

what stage in the programme the wash

has reached:

Wash

Rinses

C) Spin

bd Drain

J Drain filter

This is situated behind the small flap

door at the base of the cabinet. It will

need cleaning from time to time.

(See pages 23).

The washing programme

The washing machine has 13 programmes

and 8 additional programmes such as

"rinse" or "spin only" (see charts pages

14-17). Each washing programme is

designed for a specific type of fabric, for

example cotton, nylon mixed fabrics such

as polycotton, etc.

They follow the International Textile

Care Labelling Code ITCLC) which is

used for wash labels on garments and

household linen as well as on washing

powder packets. This makes it simple to

choose the right programme for the fabric

you are washing.

The energetic wash cycles for robust

fabrics (B-G) are completely automatic

taking the clothes through washing,

rinsing, spinning and draining.

The clothes are left suspended in water to

prevent them becoming creased by

remaining in the bottom of the wash tub

in a damp state after spinning.

To complete the cycle, turn the

programme selector dial to cycle

W for

water draining followed by a short spin,

or to cycle X for drain only if you are

washing drip dry articles.