Zanussi FL1001 지침 책자 - 페이지 11

{카테고리_이름} Zanussi FL1001에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FL1001 27 페이지. Washing machine

페이지 인쇄

Main switch

Pressing the ON/OFF button the machine is

switched on and off; the machine can be

programmed when three dashes are blinking on the

display.

Cancellation of a programme

If you want to cancel a programme already started,

you must switch the machine off. The chosen

programme is cancelled in this way.

3 FABRICS button

After having switched the machine on, press this

button to set the type of fabric to be washed.

You can choose the following types of fabrics:

WHITE/COLOURED COTTON

SYNTHETIC

DELICATE

WOOL

HAND WASH

• Press this button repeatedly until the light

corresponding to the type of fabric to be washed

lights up.

• At the same time the machine suggests a

programme for the selected type of fabric. If the

programme suggested is acceptable, you can start

the machine; if instead you want to modify the

temperature or the spin speed, press the

corresponding buttons.

• Choosing the type of fabric, the display will show

the duration of the chosen programme. The

indication of the time blinks until the programme is

started.

4 TEMPERATURE button

Pressing this button you can modify the washing

temperature proposed by the machine.

The light shows the set temperature.

On the "COLD" position the washing is carried out

with cold water.

5 SPIN SPEED button

Pressing this button you can reduce the maximum

spin speed proposed by the machine according to

the type of fabric, or you can choose the option

"rinse hold". The light shows the set position.

The maximum speed is automatically adjusted

according to the type of fabric.

There are the following speeds available:

cotton

500/700/900/ max 1200 rpm (FL1201),

synthetic /wool

500/700/ max. 900 rpm

delicate/freshen up

500/max. 700 rpm

RINSE HOLD

Choosing the position "rinse hold", the laundry

remains in the water of the last rinse.

At the end of the programme the light corresponding

to "rinse hold" remains on, to show that the water

has still to be drained before you can open the door.

A zero will light up on the display.

Spin

1000 rpm (FL 1001)