Zanussi ZWQ 5104 사용자 설명서 - 페이지 8

{카테고리_이름} Zanussi ZWQ 5104에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZWQ 5104 16 페이지.

Operating Problems

Numerous checks were carried out on your appliance be-

fore it left the factory. However, should you notice a mal-

Problems

The appliance doesn't start or

doesn't fill:

The appliance fills but emp-

ties straight away:

The appliance doesn't rinse

or doesn't empty:

The appliance doesn't spin:

You have found water around

the appliance:

The washing results are not

satisfactory :

• the appliance isn't plugged in correctly, the electrical installation isn't working,

there is a power failure,

• the lid of your appliance and the drum shutters aren't closed firmly,

• the programme start command hasn't been properly selected,

• the water supply has been cut off, the water inlet tap is closed,

• the water inlet filters are dirty (see "Care and cleaning ").

• the drainage U-piece is fixed too low (see "Installation").

• the drain hose is blocked or bent,

• the drainage filter is obstructed (see "Care and cleaning "),

• the out of balance detector has been activated: washing is unevenly distributed in

the drum,

• the "Drain" programme or "Night Cycle" or "Rinse hold" option have been selec-

ted,

• the height of the drainage U-piece is unsuitable.

• balance problem with the laundry load: add more laundry or manually adjust the

items in the drum.

• too much detergent has caused foam to overflow,

• the detergent is unsuitable for machine washing,

• the drainage U-piece isn't attached correctly,

• the water inlet hose is leaking.

• the detergent is unsuitable for machine washing,

• there is too much washing in the drum,

• the wash cycle is unsuitable,

• there isn't enough detergent.

function, please refer to the sections below before contact-

ing the after-sales service.

Causes