Zanussi ZWT 3001 사용 설명서 - 페이지 10

{카테고리_이름} Zanussi ZWT 3001에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZWT 3001 16 페이지. Top-loading washing machine

페이지 인쇄

6. CARE AND CLEANING

Do not do any cleaning operation until you have unplugged

the washing machine.

6.1. Descaling the washing machine

Normally there is no need to descale the washing machine

if the detergent was correctly proportioned.

If descaling is necessary, use a special non-corrosive pro-

duct specially designed for washing machines that you can

find in the shops. Respect the proportion and frequency of

descaling shown on your packaging.

6.2. The surface

Clean the surface of your washing machine using lu-

kewarm water and a mild detergent. Never use alcohol,

solvents or similar products.

6.3. The detergents dispenser

From time to time, you must clean the detergents dispen-

ser in order to eliminate the possible wastes of the deter-

gents and then to avoid an operating problem.

The detergent dispenser is very easy to remove for a light

cleaning.

Disassembly:

Press the clips on each side of the

detergents dispenser and pull it

upwards.

You can thus clean it using run-

ning water and a brush or a twis-

ted cloth. Check that the siphons

at the back of the detergents dis-

penser are not blocked.

Reassembly :

Put the detergents dispenser in

the notches until they lock.

6.4. The drain filter

Clean the filter at the bottom of the washing machine regu-

larly. The "filter"

light comes on if the filter is blo-cked. In

this case clean it immediately. If you wash washing that is

very fluffy, clean it after each wash.

•

Open the door, with a screwdriver for example:

•

Drain residual water:

•

Remove the filter:

After cleaning the filter, you are required to closed the

door. In fact, for reasons of safety, the door must be closed

when the appliance is working.

*depending on model

Put a receptacle under the drain.

Turn the cap in the anti-clockwise

direction until it is vertical to re-

lease residual water.

Unscrew the cap all the way and

take it off. Clean it tho-roughly

with running water. Put the as-

sembly back and screw it in the

clockwise direction.