Zanussi DE 6744 지침서 - 페이지 6

{카테고리_이름} Zanussi DE 6744에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DE 6744 28 페이지. Dishwasher
Zanussi DE 6744에 대해서도 마찬가지입니다: 지침서 (29 페이지), 지침서 (22 페이지)

페이지 인쇄

Before use

Before using your dishwasher for the

first time:

1. Ensure that the electrical and water connections

comply with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and

then fill with salt

5. Fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener

designed to remove minerals and salts from the

water supply, which would have a detrimental or

adverse effect on the operation of the appliance.

The higher the content of these salts, the harder

your water is.

Water hardness is measured in equivalent scales,

Clarke degrees, French degrees and PPM (parts per

Million).

The softener should be adjusted according to the

hardness of the water in your area. Your local Water

Authority can advise you on the hardness of the

water in your area.

The dishwasher is factory set at level 3.

If this level is not suitable for your area the softener

should be adjusted.

To select a different level be sure that

the dishwasher is off and then proceed

as follows:

1. Press INTENSIVE SID 80 and NORMAL

programme push buttons simultaneously.

2. While keeping the programme push buttons

INTENSIVE SID 80 and NORMAL pressed

switch on the dishwasher by pressing the

ON-OFF push button.

The ON-OFF indicator light comes on.

At the same time, also the indicator light of the

INTENSIVE SID 80 comes on and remains fixed

for about 5 seconds, after this it starts flashing

indicating the current level of the water softener.

Water hardness

Clarke

Level

degrees

< 6

6 - 21

22 - 35

36 - 49

50 - 63

SO362

PPM

French

(Parts per

degrees

Million)

(°TH)

< 80

< 8

81 - 300

8 - 30

301 - 500

31 - 50

501 - 700

51 - 70

701 - 900

71 - 90

Use of

salt

YES