Zanussi DI 110 TCR/C 사용 및 관리 지침 - 페이지 22

{카테고리_이름} Zanussi DI 110 TCR/C에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DI 110 TCR/C 40 페이지. Dishwasher
Zanussi DI 110 TCR/C에 대해서도 마찬가지입니다: 사용 설명서 지침 (40 페이지)

페이지 인쇄

Cleaning the Spray Arm Nozzles

The holes in the spray arm nozzles

must be kept free of debris for the

efficiency of the washing action.

Inspect the spray arms regularly. When

thorough cleaning is necessary remove

the bottom spray arm by releasing it

from its securing catches and pulling it

out (see fig. 17).

Wash the spray arm in hot sudsy

water, using a stiff saucepan brush if

necessary to remove scraps.

Reassemble carefully, making sure the

catches are secure.

To clean the top spray arm and nozzles,

slide out the top basket, then unhook

the spray arm from the central support

(see fig. 14). Remove and wash the

parts as above.

Reassemble the parts carefully.

Cleaning the Cabinet

Wipe the outside of the cabinet and

control panel regularly with a soft

damp cloth. When necessary use a

liquid kitchen or household cleaner to

remove bad marks, rinse with a damp

cloth and rub up with a soft duster.

Never use abrasive cleaners which

could damage the surface.

('are should be taken when cleaning the

bottom door seal and hinge area as any

exposed metal edges may cut if care is

not observed.

If the machine is not going to be used

for some time take the following

precautions:

Unplug the machine and turn off the

water supply.

Fill up the rinse aid container.

Make sure that the tub is clean by

carrying out the Rinse and Hold

programme and then dry the inside

thoroughly.

Leave the door ajar.