Zanussi DTI 6726 지침 책자 - 페이지 22

{카테고리_이름} Zanussi DTI 6726에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DTI 6726 24 페이지. Dishwasher dti 6726

The door on this appliance is designed for the

overlay of a panel having the following dimensions:

Width

596 mm

Height

644 - 724 mm max

Thickness

20 mm max

Weight

2 - 7.5 kg max

The panel height should be no more than

indicated, otherwise complete opening of the

door will not be possible as the furniture door

panel will hit against the dishwasher plinth.

The height of the panel depends on the height of

adjacent kitchen units (see kitchen plinth

adjustment).

Mounting the furniture door onto the door:

The panel must be fitted with a handle, as the

dishwasher handle will be hidden by the panel.

1. Drill the panel with a Ø 2 x 14 bit according to

the dimensions given in the picture.

2. Screw the two fastening pivots in the holes

indicated in the picture.

3. Mount the decor panel by inserting the two

fastening pivots into the slotted holes of the

door. Lift the decor panel until perfect alignment

with the fascia panel is obtained.

4. Once the correct position has been found, open

the door and fasten the decor panel by means

of the six 4 x 40 screws provided, using the

holes through the inner door.

596 max

525

II92

II79

II80

PFI42GB