Zanussi DW1100M 사용 및 관리 지침 - 페이지 9

{카테고리_이름} Zanussi DW1100M에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DW1100M 34 페이지. Dishwasher
Zanussi DW1100M에 대해서도 마찬가지입니다: 사용 및 관리 지침 매뉴얼 (34 페이지), 사용 설명서 지침 (34 페이지)

페이지 인쇄

Adjusting the height of the machine

(DW650M, DW1100M)

The machine's total height may be

reduced 50 mm by removing the plinth.

To carry out this operation to proceed as

follows:

a) remove the front kick-plate which 'is

fastened to the appliance by means of

two screws;

b) lean the appliance on the side and

remove the plinth by unscrewing the

four screws which fasten it to the

bottom;

c) remove from the plinth the four feet

and screw them on the holes provided on

the two cross-pieces at the bottom of the

appliance.

d) mount the smoller kick-plate.

Water supply connections

This Zanussi dishwasher may be

connected to either a hot or cold water

supply, and for convenience, it is well

worth having it permanently «plumbed

in». Just make sure that the water

pressure is within the limits given in the

technical data, and, in the case of a hot

water supply, that the temperature never

exceeds 70°C (158 °F).

Your local Water Authority will advise

you on the average mains pressure in

your area. Where the water is supplied

via a cold water storage cistern, or hot

water cylinder, you can work out the

pressure yourself in both cases by

measuring the vertical distance

(or «head») between the machine's inlet

hose, and the outlet from the cold water

storage cistern; allowing roughly 1 psi

for every 2 feet.

As to the making of the connection

itself, the coupling nut fitted to the

machine's supply hose is designed to

screw onto either a 3/4 inch gas thread

spout, or to a purpose made quick-

coupling tap such as the Press-Block.

To make this easier, the hose itself may

be turned to the right or left. In either

case, be sure to incorporate the strainer

supplied with the machine onto the joint

(fig. 5).