Zanussi DW700 사용 및 관리 지침 - 페이지 8
{카테고리_이름} Zanussi DW700에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DW700 34 페이지. Dishwasher
Zanussi DW700에 대해서도 마찬가지입니다: 사용 및 관리 지침 매뉴얼 (34 페이지), 사용 설명서 지침 (34 페이지)
alignment, and replace the screws to fix
the worktop in place (see fig. 3).
Alternatively, if you prefer to install the
machine beneath an existing worktop,
the machine's integral worktop can be
removed merely by removing the front
securing screws as above, and releasing
the worktop from its rear catch. This
done, the dishwasher will fit into a
recess of the dimensions given in
figure 3.
Important
Please ensure that when the appliance
is installed it is easily accessible for the
engineer in the event of a breakdown.
Building-in instructions
Fitting «decor panels» DW650M,
DW700 and DW1100M
To give the dishwasher a completely
«built-in» look, both the door and lower
panel can be covered with sheets of
plastic laminate (you must provide these
yourself) to match the doors of adjacent
units.
To fit these «decor panels», start by
loosening the bottom panel's retaining
screws (see fig. 4) and freeing it from its
top catch.
Make sure these screws are not removed
completely.
Next, remove the metal trim
screwed to both the door and lower
panel, fit the covering sheets of plastic
laminate, and clamp them in position by
replacing the metal trims. Finally, hook
the lower panel onto its top catch and
retighten the lower retaining screws.
Please note: The decor panels should be
fitted before building the appliance in.