Zanussi DWS 6804 지침 책자 - 페이지 7

{카테고리_이름} Zanussi DWS 6804에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DWS 6804 24 페이지. Dishwasher dws 6804

Filling with salt

If your water is "level 0" it is already soft and

therefore there is no need to use salt.

Salt must be used from level 1 upward.

Only use salt specifically designed for use

in dishwashers.

All other types of salt not specifically

designed for use in dishwasher, specially

table salt, will damage the water softener.

Only fill with salt just before starting one of the

complete washing programmes (not the Rinse and

Hold programme). This will prevent any grains of

salt or salty water, which may have been spilled,

remaining on the bottom of the machine for any

period of time, which may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt

container.

2. Pour about 1 litre of water inside the container,

or until it is full (this is necessary only before

filling with salt for the first time).

3. Then using the funnel provided, pour in the salt

until the container is full (approx. 1.5 - 1.8 kg).

Do not worry if water over flows from the unit

when filling with salt, this is quite normal.

4. Replace the cap making sure that there is no

trace of salt on the screw thread or on the

gasket.

5. Screw on the cap tightly.

The salt container will require topping up

periodically.

The salt cap has a refill indicator window in the

centre.

A green floater is clearly visible when there is salt

inside the container, and almost disappears when

the salt has finished, (ie. every 30 - 50 washes

depending on the setting of the water softener)

reminding you to add salt.

SR06

SR11

PFS01GB