Zanussi ZDT26030FA 사용자 설명서 - 페이지 8
{카테고리_이름} Zanussi ZDT26030FA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDT26030FA 21 페이지.
페이지 인쇄
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure the appliance is in user mode.
1. Press
.
•
The indicators
•
The indicator
•
The display shows the current setting:
–
= rinse aid empty notification
activated.
–
= rinse aid empty notification
deactivated.
2. Press
to change the setting.
3. Press on/off button to confirm the setting.
When rinse aid chamber is empty, the
rinse aid indicator is turned on
notifying to refill rinse aid. If the drying
results are satisfactory while using
multi-tablets only, it is possible to
deactivate the notification for refilling
rinse aid. However, for the best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
ACTIVATING THE ACOUSTIC SIGNAL FOR
THE END OF PROGRAMME
Make sure the appliance is in user mode.
1. Press
.
•
The indicators
•
The indicator
•
The display shows the current setting:
–
= acoustic signal deactivated.
–
= acoustic signal activated.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container with special salt for
dishwasher.
3. Fill the rinse aid dispenser with special rinse
aid for dishwasher.
4. Open the water tap.
8
,
and
are off.
still flashes.
,
and
are off.
still flashes.
2. Press
to change the setting.
3. Press the on/off button to confirm the setting.
HOW TO DEACTIVATE AIRDRY
AirDry improves the drying results with less energy
consumption.
While the drying phase operates, the
device opens the appliance door. The
door is then kept ajar.
By default, AirDry is activated with all programmes
excluding Rinse and Hold (if applicable), but it is
possible to deactivate it.
Make sure the appliance is in user mode.
1. Press
.
The indicators:
,
still flashes.
The display shows the current setting:
activated.
2. Press
to change the setting:
deactivated.
3. Press on/off to confirm and save the setting.
CAUTION! If children have access to
the appliance, it is advised to
deactivate AirDry as opening the door
may pose a danger.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
THE SALT CONTAINER
CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
,
are off. The indicator
= AirDry
= AirDry