Zanussi ZDT311 사용자 설명서 - 페이지 13

{카테고리_이름} Zanussi ZDT311에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDT311 20 페이지. Zanussi dishwasher user manual
Zanussi ZDT311에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)

페이지 인쇄

To remove filters B and C,

turn the handle approxi-

mately 1/4 anticlockwise.

What to do if...

The appliance does not start or stops during operation.

Remove the flat filter A

from the bottom of the ap-

pliance.

Put the flat filter A in the

bottom of the appliance.

Install the flat filter cor-

rectly under the two

guides D.

Important! Do not remove the spray arms.

If the holes in the spray arms become clogged, remove

remaining parts of soil with a cocktail stick.

External cleaning

Clean the external surfaces of the appliance and control

panel with a damp soft cloth. Only use neutral detergents.

Do not use abrasive products, scouring pads or solvents

(acetone, trichloroethylene etc...).

Frost precautions

Caution! Do not install the appliance where the

temperature is below 0 °C. The manufacturer is not

responsible for damage because of frost.

If not possible, empty the appliance and close the door.

Disconnect the water inlet hose and remove water from

the water inlet hose.

If there is a fault, first try to find a solution to the problem

yourself. If you cannot find a solution to the problem

yourself, contact the Service Force Centre.

Put the filter system in po-

sition. To lock the filter

system, turn the handle

clockwise until it locks in

position.